FOAM DESTROYER FCA-90:  A high-performance, synthetic-based, foam control additive developed for water-based coatings, adhesives, inks, and pigment dispersions.  Provides excellent performance, compatibility, and age stability at lower addition rates compared to conventional, mineral oil-based products.  Foam Destroyer FCA-90 contains no mineral oils or silicones and has very low (less than 1%) V.O.C.  Will not cause swelling of rubber rolls or flexographic printing plates and is suitable for use in food contact applications in compliance with 21 C.F.R. 175.105, 21 C.F.R. 176.170 (defoamer), 21 C.F.R. 176.180 (defoamer), 21 C.F.R. 175.300, or 21 C.F.R. 176.210.

FOAM DESTROYER IDL-3:  A three percent (3%) active, silicone antifoaming and defoaming agent.  Intended for use in aqueous media and effective for reducing foam caused by the presence of surfactants.  Provides quick defoaming and long-lasting, antifoaming performance.

FOAM DESTROYER IDL-5:  A five percent (5%) active, silicone antifoaming and defoaming agent intended for use in aqueous media.  Effective for reducing foam caused by the presence of surfactants.  Foam Destroyer IDL-5 provides quick defoaming and long-lasting, antifoaming performance.

FOAM DESTROYER II-PK:  A 30% active, food grade, silicone antifoam emulsion intended for use in aqueous media.  Effective for reducing foam caused by the presence of surfactants, starches, and colloidal proteins.  Foam Destroyer II-PK provides quick defoaming and long-lasting antifoaming performance in hot or cool systems.

FOAM DESTROYER V-K:  A food grade, Kosher-certified, forty percent (40%) active, silicone antifoaming and defoaming agent.  Provides quick defoaming and long-lasting antifoaming performance.

FOAM DESTROYER NS-21:  A one hundred percent (100%) active, non-silicone defoamer designed for usage in a wide range of industrial, aqueous processing applications.  Readily dispersible in (cool) water and highly effective on surfactant-, starch-, and protein- stabilized foams.  Foam Destroyer NS-21 is an excellent foam control product for cleaning and parts washing applications due to its dispersibility and "free-rinsing" characteristics.  An excellent product for wastewater digesters and aeration ponds, particularly where high-residual surfactant levels create stable foam.  Foam Destroyer NS-21 is free of silicone fluids or compounds that can leave problematic deposits.

FOAM DESTROYER NS-100:  A high-performance, non-silicone defoamer developed for water and wastewater treatment applications.  Provides quick foam knockdown and sustained antifoaming performance in many systems.  Relatively unaffected by hot or cold temperatures.  A very clean-running product as it contains no mineral oils, silicones, or hydrophobic particulate solids.

FOAM DESTROYER NS-200:  A one hundred percent (100%) active, non-silicone defoamer designed for use in a wide range of industrial, aqueous processing applications.  Moderately dispersible in water and highly effective on surfactant-, starch-, and protein- stabilized foams.  Foam Destroyer NS-200 is an excellent foam control product for cleaning and parts washing applications due to its dispersibility and fast foam knockdown.  An excellent product for wastewater digesters and aeration ponds, particulrly where high residual surfactant levels create stable foam.  Foam Destroyer NS-200 is free of silicone fluids or compounds that can leave objectionable deposits.

FOAM DESTROYER OFD-12:  A solution of hydrophobic polymer used to control foam in non-aqueous applications, including lubricants, solvents, and petroleum refining.  An effective antifoaming agent that provides quick foam knockdown in many systems.  Foam Destroyer OFD-12 is free of silicones, silica, and fluorine.

FOAM DESTROYER OFD-16:  A solution of hydrophobic polymer used to control foam in non-aqueous applications, including lubricants, solvents, and petroleum refining.  An effective antifoaming agent that provides quick foam knockdown in many systems.  Foam Destroyer OFD-16 is free of silicones, silica, and fluorine.

FOAM DESTROYER RDL-20:  A twenty percent (20%) active, silicone nonionic, F.D.A.-compliant emulsion designed to control foam in water-based food and chemical processes.  A low-viscosity, water-dilutable, easily-dispersed, and long-lasting antifoam.

FOAM DESTROYER WT-I:  An economical, general-purpose, silicone antifoam emulsion and defoaming agent.  Suitable for use in a wide variety of aqueous systems.  Provides quick defoaming and long-lasting antifoaming performance in hot or cool systems where surfactants, starches, proteins, and other colloidal materials lead to undesirable foam.

TAYCHEM LRE-60:  A sixty percent (60%) active, nonionic emulsion of medium-viscosity silicone fluid.  Provides gloss, lubrication, abrasion resistance, and release properties to a wide variety of substrates.  Finds broad commercial applications, including mold release agents, tire and vinyl protectants, textile softeners, waxes, and polish compounds.  Very easy to dilute and formulate.  Suitable for use in food packaging applications in compliance with 21 C.F.R. 175.105, 21 C.F.R. 175.300, 21 C.F.R. 175.320, 21 C.F.R. 176.170, and 21 C.F.R. 176.180.

TAYCHEM MWR:  A water-reducible, silicone-based, water-repellent emulsion designed for use on masonry construction materials.  When properly applied, this product dramatically reduces penetration of liquid water while leaving the substance permeable to water vapor.  TayChem MWR is suitable for treatment of concrete, stucco, brick, mortar, synthetic and natural stone, and other mineral construction materials.

TAYCHEM PHOSPHONATE CAP-5:  Excellent stabilizer for peroxide compounds.  Excellent, scale-inhibiting properties and good ability to complex metal ions.  Excellent properties of inhibiting precipitation of calcium carbonate and very good corrosion inhibition properties for unalloyed steel.  Applications:  As a peroxide stabilizer in cotton bleaching, as a scale inhibitor in oil field water treatment, for the treatment of cooling water and boiler water, and as an additive in detergents and cleaning agents.

TAYCHEM REL-35:  A thirty-five percent (35%) active, F.D.A.-compliant, nonionic emulsion of medium-viscosity silicone fluid.  Provides gloss, lubrication, abrasion resistance, and release properties to a wide variety of substrates.  Finds broad commercial applications, including mold release agents, tire and vinyl protectants, textile softeners, waxes, and polish compounds.  Very easy to dilute and formulate.  Suitable for use in food packaging applications in compliance with 21 C.F.R. 175.105, 21 C.F.R. 175.300, 21 C.F.R. 175.320, 21 C.F.R. 176.170, and 21 C.F.R. 176.180.

TAYCHEM REL-40:  A forty percent (40%) active, F.D.A.-compliant, nonionic emulsion of medium-viscosity silicone fluid.  Provides gloss, lubrication, abrasion resistance, and release properties to a wide variety of substrates.  Finds broad commercial applications, including mold release agents, tire and vinyl protectants, textile softeners, waxes, and polish compounds.  Very easy to dilute and formulate.  Suitable for use in food packaging applications in compliance with 21 C.F.R. 175.105, 21 C.F.R. 175.300, 21 C.F.R. 175.320, 21 C.F.R. 176.170, and 21 C.F.R. 176.180.

TAYLUBE 140C PLUS:  A one hundred percent (100%) active compound of polydimethylsiloxane coupled with a specialty wax.  Typical uses are for kiss-roll application on continuous filament, core spun, and cotton-wrapped polyester and nylon sewing threads.  Provides excellent sewing performance in medium-duty applications.  Improves the overall performance of sewing threads.

TAYLUBE 150C PLUS:  A one hundred percent (100%) active, compounded, silicone-based lubricant designed for ambient temperature, "kiss roll" application to sewing thread.  Provides excellent sewing performance on continuous filament, core spun, and cotton-wrapped polyester and nylon sewing threads.  Essentially non-staining and non-yellowing.

TAYLUBE 404E PLUS:  A fifty percent (50%) active, exhaustible lubricant emulsion containing polydimethylsiloxane and waxes.  Designed for the exhaustion process on textured or spun polyester thread.  Design of this emulsion guarantees an even distribution, especially on spun polyester thread.  Excellent lubricant for medium- and heavy- duty sewing thread applications.